Sanidry Dehumidifier

Sanidry Dehumidifier Sanidry DehumidifierHere is some basic company information about Sanidry dehumidifier. It’s made by Basement Systems Inc. their headquarters is located in Seymour, Connecticut. They currently operate world wide in – USA Canada, UK and even Ireland with a network of well over 300 licensed contractors. The main market that this company is targeting is – basement and crawl space dehumidifiers. They try to make the best products possible to protect and improve basements or crawl space areas.

The prices for sanidry dehumidifiers various because the only way to get any prices of them is from a contractor. The prices that you will find are there to help you gauge what you might pay compared to other dehumidifiers which are available for purchase off the shelf.

Sanidry has an ENERGY STAR rating for there dehumidifier systems, so you know that when you decide to purchase one, it will be working good with less energy.

So what does a Sanidry dehumidifier suppose to do? That is a great question to be asking. The main purpose of these dehumidifiers are to lower the humidity levels in basements and crawl space, which as you know are the most difficult areas to get lower humidity in any house. Since mold, dust mites, and other harmful molds that thrive and survive in places which have a humidity level of 50% or higher. With those unpleasant guests around your house they can trigger allergic reactions with people that have any sensitivity to them.

The Sanidry dehumidifier does this by using a powerful 250 CFM blower that grabs air to dry faster and also moves the air around basements and crawl spaces faster, by running it through a huge cold coil which looks kind of like a truck radiator. It is Better than the little spiral coils that you will find in small or other lower quality dehumidifiers. Then the dehumidifier will run the existing cold dry air around a special heat-exchanger core that will pre-cool incoming wet air to recapture engery. There are more complicated components to how the sanidry dehumidifier works, but those are the most important ones that you should know about.

The dehumidifiers that sanidry offers run all day and night, rarely stopping at all for a rest. So, this means that it will be consuming electricity all the time, unless you turn it off. It also require very little attention to keep it running.

There are two main dehumidifiers, they are the following:

SaniDry XP Basement Dehumidifier

This type of dehumidifier is mostly meant for basements, but can all be used for large spaces that are within 2,500 square feet. It is an upright model that is energy efficient for lowering the humidity level and making your air healthier.

This basement dehumidifier can spit out 109 pints of water per day capacity. And it is also AHAM tested. This has a built in defrosting system so it can operate in temperatures as low as 40 F. It has digital settings with a variable setting ranging between 26% to 90%. This uses a 15 amp standard plug-in, that is a 115 outlet with a 10 foot power cord.

It has a gravity drain hose to be used to connect to a floor drain, with waterGuard and a sump pump. It can be extended using a 1/2 PVE pipe very easily.

SaniDry CSB Dehumidifier

This dehumidifier is mainly used for crawl spaces. Even in mid-sized basements and other spaces that are within the 2,500 square feet area. The CSB is a powerful compact dehumidifier that can move 90 pints of water per day.

The CSB is controlled by what is a called a ‘dehumidistat’ that is a positive “ON” and “OFF” setting which has a range from 20% to 80%. This also has a defrosting system, so this dehumidifier can run fine in temperatures down to 55 F.

Related Posts: